To flash the Samsung Galaxy Tab 7.0 Plus, download the SGH-T869 firmware. Most software difficulties may be resolved by installing the stock firmware for the SGH-T869. That is the final solution for everyone.
Make sure you’re getting the right firmware for your device. Because the Samsung Tab 7.0 contains a lot of firmware, be cautious. Because firmware can vary based on the location. The SM-firmware SGH-T869’s is exclusive to United States.
For the repair of any device’s firmware, including the Galaxy Tab 7.0 Plus, flash files are necessary. So, if your Tab 7.0 Plus starts behaving strangely, such as app hanging, freezing, or not reacting to touch, now is the time to take action. Try a soft or hard reset if this happens. For the most part, it will solve the problem. This isn’t, however, a long-term answer.
Samsung Galaxy Tab 7.0 Plus SGH-T869 Firmware flash file
Download Samsung derivers first to your PC. Then Odin tool is also necessary for the process. Find the best instruction guide on flashing firmware and follow each guideline cautiously. If the first time is not successful you will not get a Pass message. But don’t worry. Try the whole process again from the beginning. Find below SGH-T869 firmware 4.0.4 download pages;
United States
PDA: T869TMBLG7 / CSC: T869UVLG7 / Android Version 4.0.4
File Name: T869TMBLG7-T869UVLG7-TMB.zip – Start Download Here (655 MB) | Mirror Link
But what if the phone has been bricked or is locked in a boot loop? The device’s warranty may potentially be voided at this point. All you must do now is download and install the T869 flash file from our website. The download places for the SGH-T869 firmware are android 4.0.4.
Here are some common issues that can occur with your device. The Stock Firmware should be needed when you want to carry out any of the following tasks:
- Android version Update.
- Reinstall the official firmware.
- Unroot Android OS.
- Fix software issues.
- Battery draining issues fix.
- Fix a boot loop error and hanging on the Samsung logo.
- Solve errors like rebooting continually.
- Remove malware, virus, and spyware.
- IMEI issues
- Fix unknown baseband error and more…
How to Flash Samsung Galaxy Tab 7.0 Plus SGH-T869
Before Flashing Prepare those,
- Firstly, Backup the device data.
- Then, Download the firmware.
- Secondly, Download the latest Samsung Odin version.
- Download Latest USB driver. Then install it.
- Charge the Battery at least 50%
Time needed: 15 minutes
Read the following Flashing Steps before take action.
- Download above SGH-T869 Stock firmware on your Windows computer
You need to find correct firmware, so look the details and get your one.
- Odin3 flash tool download on your windows computer
We have provided you with a reliable source to Odin3 download. Go to that page and get the Odin3 portable software. Do not need to install it.
- Now, extract the downloaded ZIP files in a separate folder.
Always those packages comes in Zip format. So, you need to unzip to get firmware files and the flash tool.
- Odin3 folder has EXE file, Open it.
Open the folder and find “EXE” file. Now it will be open Odin3 software window.
- Add Firmware files related slot in the Odin window.
Add each file to its respective field in Odin3. Use CSC_xxx if you want to do a clean flash or HOME_CSC_xxx if you want to keep your apps and data.
AP (System & Recovery)
BL (Bootloader)
CP (Modem/Radio)
CSC_xxx (Country/Region/Operator)
HOME_CSC_xxx (Country/Region/Operator) - Now you need Boot your phone in to “Download Mode”.
If you don’t know how to turn on this Mode, Follow this video guide;
- Then Connect Phone in your computer.
Odin will recognize your phone, you can see turn blue in left side, BLUE box will show up with the COM port number. So, everything is fine move next step…
- Click the START button
Then, Odin will start the process after hit the Start button. Wait for Odin to say ‘PASS’ in a GREEN box.
- Once the flash is complete, your phone will be reboot automatically.
So, After reboot, you can disconnect your phone from the PC.
Now It’s all over.
Leave a Comment